This tutorial was created help you understand switching power supply basics.
It applies only to push-pull switching power supplies powered from a
12v DC source (like those used in virtually all car audio amplifiers).
It's not an in-depth tutorial and there is much more to learn but this
should help introduce you to the basics. Most of the other sites and
subject matter seem to be written for those who already know the
material. This page is for those who know basic electronics but know
absolutely nothing about switching power supplies. Hopefully, the
information you find here will help you understand the subject matter
well enough to understand the more advanced material you'll find on
other sites. If you find that something is being discussed but some
pre-requisite information seems to have been omitted, please email me. If you have questions, comments or suggestions regarding this material, feel free to email me.
If you're interested in building a switching power supply but are
intimidated by the length of this page, don't be. Take it one section at
a time. Give it time to sink in and a couple of days later, read
another section.
The tutorial:
http://www.bcae1.com/switchingpowersupplydesign/switchingpowersupplytut01.htm
It is the best time to make some plans for the future and
it's time to be happy. I have read this post and if I could
I want to suggest you some interesting things or advice.
Perhaps you can write next articles referring to this article.
I desire to read more things about it!
Posted by: Ceola Commer | 09/03/2013 at 08:04 AM