The Manufacturer

Fingerprint Safes

Once reserved for military and government, fingerprint safes are the latest trend in home and office safes. There are numerous advantages of owning a fingerprint safe, compared with a traditional safe. First, these safes operate with the touch of a finger. No more lost keys or forgotten passwords. Second, as your fingerprint is unique, these safes are extremely secure, as no one else has your fingerprint. The safes are extremely easy to program, add or delete users and, with a fingerprint capacity of 100, are the perfect keyless solution to protect valuables.

The safe recognizes only the fingerprints you select and does not recognize any others. Thieves simply can’t break in, and little prying fingers will soon give up in frustration. You’ll never again have to fumble for keys, lose them or worry about where to hide them. No complicated combinations to remember either. 

Crack Almost Any Electronic Safe with the Bounce Technique

 

If you have a electronic safe with a passcode entry, a few things could go wrong. You could forget the code, the electronic mechanism could fail, or someone could change the code without you knowing. In the event you need to break into your own electronic safe, here's how to do it.

The technique you use to crack an electronic safe is called safe bouncing (which is an accurate name once you see how it's done). It's apparently easy enough for a kid to do, but looks like it could take a bit of practice. As you can see in the video above, you literally drop part of the safe against the table (or whatever surface it's resting upon) while turning the locking knob. If your timing is right, you'll have turned the knob when the safe's lock bounces open for a brief moment. This works because many cheaper safes have locks that lift. Better safes have counterweight mechanisms so the lock is held in place even when the safe is moving. You won't be able to bounce those open, but you'll have no problem with the lower-end options. If you're successful, the deadbolts will recede into the safe's door and you'll be able to open it up.

While good for those times when you lose your passcode, it's not so great for those times when someone tries to rob you. If you're concerned about the safety of a given safe, you might want to try this bouncing technique before your purchase.

How To Beak Into Most Digital Safes

 

This tutorial will show you how to break into pretty much any digital safe it is a easy way to get into a safe if you have lost your key, the batterys run out or you just are getting into mischive. I dont care if you do use this for bad, but just on your head be it.

This obviously wont work on bank safes but lots of other household and hotel safes

Making Your Home Safe For Baby

Your baby is on the way, and there is a lot to think about. Besides making sure that you have baby furniture and clothing for your new son or daughter, you'll want to check that your home is safe. These tips can help you cover all the safety bases.

Before you bring baby home:

• Remove pillows, blankets, and stuffed animals from the crib to prevent your baby from suffocation.
• Check to see that smoke detectors and carbon monoxide detectors in your home are working. Place at least one smoke detector on each level of your home and in halls outside of bedrooms. Have an escape plan in case of fire.
• Put emergency numbers, including poison control, near each phone. Have at least one phone in your home connected by land line. Cordless phones do not work when the power is out, and cellphone batteries can run out.
• Make sure your home or apartment number is easy to see so fire or rescue can locate you quickly in an emergency.
• Make sure handrails are installed and secure in stairways. Always hold the handrail when using stairs, especially when holding your baby.

Your baby will be crawling before you know it. Most babies begin crawling around six to nine months. Crawling on your hands and knees will reveal many dangers to your baby. Thinking ahead to the toddler years will help you to take care of other hazards before your baby grows and finds them first. Here are some things to do before your baby is crawling:

• Cover all unused electrical sockets with outlet plugs.
• Keep chords out of baby's reach. Tack up chords to vertical blinds and move furniture, lamps, or electronics to hide chords.
• Secure furniture and electronics, such as bookcases and TVs, so they cannot be pulled down on top of your baby.
• Use protective padding to cover sharp edges and corners, such as from a coffee table or fireplace hearth.
• Install safety gates at the bottom and top of stairwells or to block entry to unsafe rooms.
• Use safety latches on cabinets and doors.
• Store all medicines, cleaning products, and other poisons out of baby's reach.
• Remove rubber tips from doorstops or replace with one-piece doorstops.
• Look for and remove all small objects. Objects that easily can pass through the center of a toilet paper roll might cause choking.
• Keep houseplants out of baby's reach. Some plants can poison or make your baby sick.
• Set you water heater temperature to no higher than 125 degrees Fahrenheit. Water that is hotter can cause bad burns.
• Closely supervise your baby around a family pet. Pets need time to adjust to a new baby.

How To Install A Wall Safe

Locate the wall studs with a stud sensor or hammer and nail. Then, use a level to draw a 14¼-inch square onto the wall between the two studs. Cut out the opening with a drywall saw; work carefully to make sure you don't cut into electrical wiring. (If you find some, you'll have to push it aside or reroute it.)

The left and right edges of the cutout will extend ¼-inch beyond the studs on each side of the opening. Fill in these spaces with wood shims or strips of ¼-inch plywood to build the studs out flush with the edges of the opening. Secure the wood with finishing nails.

With its door open, tilt the safe into the opening and press it flush against the wall.

Fasten the safe to the studs with the four screws provided. Install the two removable steel shelves, if desired. Note that you’ll need both the three-digit combination and the key to open the safe.

 

Source: http://www.thisoldhouse.com/toh/how-to/intro/0,,20177939,00.html

 

Conductive Material

Made of special vinyl ester resin with distinctive properties, such as electrical/heat conductivity, high heat distortion temperature, corrosion resistance, and high mechanical strength, conductive material can be used in different situations. The composition is disclosed for the use of bipolar plate of fuel cells and other applications.

Polymer Insulator Resists Thousands of Volts

Polymer insulators are made from resins, a relatively uncommon material for insulator compared with porcelain. With high electrical resistance, it can moderate the voltage for stable operation. Polymer insulator being a common product applied in electronic device, it can moderate the voltage for stable operation with high electrical resistance.

 

An electrical insulator is a material whose internal electric charges do not flow freely, and which therefore does not conduct an electric current, under the influence of an electric field. A perfect insulator does not exist, but some materials such as glass, paper and Teflon, which have high resistivity, are very good electrical insulators. A much larger class of materials, even though they may have lower bulk resistivity, are still good enough to insulate electrical wiring and cables. Examples include rubber-like polymers and most plastics. Such materials can serve as practical and safe insulators for low to moderate voltages (hundreds, or even thousands, of volts).

How Delta Arrestor protects you from high voltage surge

A lightning arrestor (delta arrestor) helps to provide immediate and reliable protection against the high voltage surge (such as that of a lightning strike) on your building or power lines. These units last for a lifetime, except in the extreme cases of rare excess surges. This particular type of surge is particularly devastating to electrical components, almost always rendering them useless. In addition, if you are not protected against high voltage surges, an electrical fire can easily be started within moments as a result of high current levels rushing through building wires.

 

Your breaker box is incapable of providing protection against this “lightning fast” surge of electricity. By the time your breaker has switched off, the surge has literally already done its damage. Note that although a lightning arrestor helps to prevent high voltage spikes from infiltrating your circuits, it does not protect against the common smaller surges.

Safety Glasses, the Critical Eye Protection Gears

       Do you work in a glass or steel factory? Are you a hardware specialist and require safety glasses to protect yourself from potential electric sparks? You would definitely agree that wearing glass inside another pair can cause numerous problems like increased humidity and discomfort in wearing the glasses. This is why, it is recommended to wear these goggles to avoid any potential threat to eyes during work. These goggles are also required while playing a variety of adventure sports. These are worn to provide additional safety to the player. These protective eyewear are lightweight and comfortable so that they can be worn for a longer duration of time. Thus if you too are in search of the right safety eyewear for your specific requirement, checkout the web!

       Safety glasses are highly effective in protecting the eyes from hazardous substances. There are various incidents of eye injuries reported every year and most of them are a result of debris. Some of the industries that involve various chemical processes for manufacturing their products use certain chemicals that are harmful to the eye. The goggles for workers from such industries are given special goggles that prevent liquids from getting into their eyes. Be it any industry, eyes are one of the most useful organs of the body and they must be provided with all the necessary protection.

       The use of safety equipments is highly recommended in places where the workers are at a high risk of being exposed to certain blood borne or airborne pathogens. All the workplaces are bound by law to protect their workers from a potential occupational hazard. Some of the industries may also require N95 masks for protecting the respiratory system of their workers. The use of safety equipments is highly recommended in places where the workers are at a high risk of being exposed to certain blood borne or airborne pathogens. All the workplaces are bound by law to protect their workers from a potential occupational hazard. The N95 Masks are very effective in environments where the workers run the risk of inhaling pathogens or any hazardous substances. There are different models of such masks to choose from as they are manufactured for different types of industries. The highest standard of quality is maintained during the production of these masks which ensures complete safety of the workers. While selecting these masks, care must be taken to choose the masks that have been approved by the concerned authorities.